Weighing systems - Industrial weighing

PRODUCTS



	LOAD CELL SIMULATOR
	Modello SC1
	Has been specifically design to simulate load cell output for instrument calibration and plant simulation. The simulator may be connected to the instrument instead of the load cell and generates the required signal by means of the graduated control knob located on the front of the simulator.



	JUNCTION BOX FOR LOAD CELLS
	Model CGU
	Has been designed for electronic weighing systems using strain-gage load cells. - Hopper and silos weighing - Platform scales - Batching and weighing systems - Weighing for intrinsically safe installations



	REPEATERS OF WEIGHT
	Model GCXX
	Big display is suitable for application in any industrial and civil system. Is designed to work with LCD instrument. The GC serial display is equipped with a serial line input RS485 or RS 232. This input read the data and shows it. There are not calibration or setting.



	RADIOMODEM
	RMS
	RMS is a VHF simplex/half-duplex high quality radiomodem with an output power of 200 mWERP with a dedicated λ/4 antenna, operating on six 12,5 kHz channels or three 25 kHz channels in the 169.400 – 169.475 MHz band in according to the European Decision 2005/928/CE. These products are characterised by FREE USE. The radiomodem is enclosed in an extruded aluminium box containing the RS232/RS485 interface and supply unit card. All the Radiomodems are fully transparent to the user and configurable from the PC by dedicated software for the desired functions.



	ROUND STAY RODS
	Model BSx - xx

CELMI s.r.l.
L.go Brugnatelli 13/16
20090 Buccinasco (MI) Italy
Tel. ++39 0245712209 Fax ++39 0245705836
info@celmi.com