860 SERIES

request information for this product

features

Differential Pressure Transmitter Series 860

CONSTRUCTIVE CHARACTERISTICS:

  •  Accuracy: ±1% F.S.O.
  •  Stability: +/- 0,5% F.S.O./yr.
  •  Thermal effects Zero: +/- 0,075% F.S.O/°C (0,5" Range) +/- 0,120% F.S.O./°C
  •  Over pressure: 20Psi or 2X FSP, whichever is greater
  •  Pressure range: 0,25 WC to 40 WC (custom or Bi-Directional ranges available)
  •  Compensated range: 10° to 50°C (50° to 122° F)
  •  Media: limited only to media that will not attack polyphenylene sulphide (PPS), polyetherimide (PEI), silicone RTV. Note that liquids are allowed in either or both  ports.
  •  Operating humidity: 90% RH, non-condensing
  •  Operating temp.: -25° to 70° C (-13° to 158° F)
  •  Input supply: 12-24 VDC/24 VAC
  •  Supply current:
  •  Load resistance: 2 Kohm minimum on voltage out, 250 ohm maximum loop resistance on 4-20mA (500 ohm maximum loop resistance on 4-20mA upon request)
  •  Output signal: 1-5VDC, 1-10VDC or 1-10VDC 4-20mA
  •  Adjustments: Offset 60% of F.S.O. minimum
  •  Electrical connections: pluggable screw terminal block
  •  Pressure connections: Brass Barbed fitting for 1/8" I.D. id tubing
  •  Housing: Impact resistance ABS plastic
  •  Dimensions: approx. 3,5" x 2,7" x 1,4" (8,7cm x 6,8cm x 3,5cm)
  • 860 SERIE

Request information

If you ask for information about this product contact us
Address
L.go Brugnatelli 13/16 - 20090 Buccinasco (MI) Italy
send request
Fill the form
subscribe to the newsletter