TYPE SC1

- The load cell simulator TYPE SC1 has been specifically designed to simulate load cell for instrument calibration and plant simulation.

- The simulator may be connected to the instrument instead of load cell and generates the required signal by means of the graduated control knob located on the front of the simulator.

- The control knob may be locked to guarantee a constant signal output under unwilled movements.

SPECIFICATIONS:

• Signal output: ±2,0mV/V
• Supply side resistance: 400Ω ±10%
• Power supply: 15Vcc max
• Resolution: 0,004mV/V
• Housing material: plastic
• Dimensions: 120x80x50 mm
• Cable lenght: 1mt.
• Protection: IP54
• Weight: 250g

ENVIRONMENTAL CONDITIONS:

• Operating temp.: 0°C - 50°C
• Relative humidity: 40 - 80%
• Insulation resistance: >2GΩ