860 SERIES

Differential Pressure Transmitter Series 860

CONSTRUCTIVE CHARACTERISTICS:

Accuracy: ±1% F.S.O.
Stability: +/- 0,5% F.S.O./yr.
Thermal effects Zero: +/- 0,075% F.S.O/°C (0,5" Range) +/- 0,120% F.S.O./°C
Over pressure: 20Psi or 2X FSP, whichever is greater
Pressure range: 0,25 WC to 40 WC (custom or Bi-Directional ranges available)
Compensated range: 10° to 50°C (50° to 122° F)
Media: limited only to media that will not attack polyphenylene sulphide (PPS), polyetherimide (PEI), silicone RTV. Note that liquids are allowed in either or both ports.
Operating humidity: 90% RH, non-condensing
Operating temp.: -25° to 70° C (-13° to 158° F)
Input supply: 12-24 VDC/24 VAC
Supply current:
Load resistance: 2 Kohm minimum on voltage out, 250 ohm maximum loop resistance on 4-20mA (500 ohm maximum loop resistance on 4-20mA upon request)
Output signal: 1-5VDC, 1-10VDC or 1-10VDC 4-20mA
Adjustments: Offset 60% of F.S.O. minimum
Electrical connections: pluggable screw terminal block
Pressure connections: Brass Barbed fitting for 1/8" I.D. id tubing
Housing: Impact resistance ABS plastic
Dimensions: approx. 3,5" x 2,7" x 1,4" (8,7cm x 6,8cm x 3,5cm)